Blog - galaxy tab 4 8.0 battery replacement

X

How to replace the EB-BT330FBU battery in a Samsung Galaxy Tab 4 8.0"

Posted by mpfproducts.com on 7th Mar 2017

Use this detailed step-by-step repair guide to help you replace the EB-BT330FBU battery in your Samsung Galaxy Tab 4 8.0 Tablet.

Necessary Replacement Parts:

Necessary Replacement Tools:

Above tools are included for FREE when this replacement battery is purchased from MPFProducts.com.

Step 1

Insert one of the plastic opening tools at the top between the black plastic casing and the metal rim. Carefully pry around the tablet to separate the clips holding the front and rear panel and continue to pry using the tool along the perimeter of the tablet to separate the back plastic casing from the front assembly panel.

Do not use excessive force as the plastic clips could be easily broken

Step 2

Gently set the tablet with the LCD screen facing down on a soft surface so you can remove the back casing. Take care to not scratch or damage the LCD screen during this step.
Grasp the back black casing and lift to separate from the front assembly panel.
Once separated, locate the battery and peel up the corner of the white sticker which reads "PULL (HANDS ONLY)" to form a tab with the sticker.
Step 3
Using your thumb and index finger, pinch and pull the tab from the top right to begin to remove the battery from the front panel assembly. If you experience resistance, you may want to use a plastic opening tool between the battery and panel assembly to aid in lifting and removing the battery. Take care to not pull too hard in an attempt to completely detach the battery as there are cables still connecting the battery to the board.
Starting at the bottom left side of the battery, remove the green tape. Place in a safe area to reuse if possible.
Use a plastic opening tool and place under the battery connector to gently disconnect the battery cable connector from the circuit.

Step 4

Lift the battery towards you, away from the front panel and remove from your device.
Once the battery is removed, replace with your EB-BT330FBU Replacement Battery
Simply follow these steps in reverse to reassemble!